Crafty Hands Mixed Media: 2016

Saturday 17 December 2016

Altered Bottle

Hello again!
Welcome to this week's blog where I want to share with you an altered bottle I created.
My inspiration was shipwreck treasure found under the sea. I wanted the piece to use blues (my favourite colour) and purples, and to have a lot of texture.

To begin I took an empty wine bottle and used Art Basics Soft Gloss Gel to cover it with a base layer of burlap.

This was just to give the bottle texture so that my next layers would stick to it better.

I then cut up strips of old fabric and lace. I dipped these in Finnabair's Sculpture Medium (natural beige) which I diluted about 50-50 with water. I squeezed off excess medium then added the fabric strips to the bottle. I made sure to fold and crinkle the fabric for texture. I used dollops of Heavy Body Gel to hold the fabric in place where I felt it was needed.

Next I added embellishments from my stash along with Malange Pebbles, art stones and mini art stones, again using the heavy body gel. I allowed everything to dry overnight.

Once the piece was completely dry the sculpting medium had stiffened the fabric. I then sprayed the bottle with inks from Dylusions

You will see that the dye did not immediately soak into the fabric. That was ok, as I next dry brushed the piece with a white gesso wash. This spread the dye over the whole piece.

It is important when using this dry brushing technique to keep cleaning your brushes or you will end up with your work all one homogenous colour rather than the areas of different colours.

I kept repeating the dry brushing, drying the work with my heat tool in between layers, until I was happy with the colours.

You will see how this technique gave definition to the folds in the fabric.

Next I repreated the dry brushing but this time with IndigoBlu Goldfinger acrylic paint to add a touch of richness to the bottle.

I also used this to paint the embellishments and some cord I had twisted around the neck of the bottle so they stood out.

After this, I splattered paints onto the bottle using my Tim Holtx Splatter Brush.

I used Titanium White acrylic paint and IndigoBlu Goldfiner, Aladdin and Kingfisher Blue Acrylic for the splattering.

To finish to bottle off I added some of Finnabair's Art Glitter from the Caribbean Seas collection with soft gloss gel.

If you enjoyed this project you can follow my blog by going to bloglovin.com or downloading the Bloglovin' App.

If I have inspired you to try a bit of mixed media you can find the supplies I used in our online shop (just click the links) or pop in and see us at Craftsite in Cramlington, Northumberland if you are passing!

I would love to see your mixed-media art. Please share it on Instagram and tag me @craftsiteshop.

Supplies used are available to order from Craftsite.co.uk. Just click the item to go to the website.

Art Basics Heavy Body Gel

Art Basics Soft Matte Gel

IndigoBlu Acrylic Paint

Finnabair Glitter

Tim Holtz Splatter Brush

Sunday 11 December 2016

Believe in the Magic

Hi Everyone!

How are your holiday preparations going?

Are you like me, a boxaholic? I can't throw out a good box so today I'm going to show you how I upcycled an empty chocolate box from last Christmas into a decoration for this Christmas.

I started out with a triangular shaped box. I loved the shape & the acetate 'window', and thought it would make a great frame for a winter scene.

First of all I masked off the acetate window then painted the box light blue using IndigoBlu English Cottage Paints Acrylic in Grandma's Teacup.

Once dry, I used IndigoBlu English Cottage Paints Acrylic in Park Lane to dry brush the box so it had almost a washed wood effect. I repeated this with a basic acrylic paint in Titanium White.
Next I grabbed my Tim Holtz Splatter Brush and splattered the box with watered down titanium white acrylic. I love this effect!

For the inside of the box I wanted to create a winter scene so I cut a piece of stamping card to fit my box (plus extra on the bottom to fold up, as seen in the picture. Why? You'll see later!)

I created the background by blending Tim Holtz Disstress inks in, from top to bottom, Black Soot, Faded Jeans & Broken China. I left the bottom section white. To create the mountain range I simply tore the edge of a piece of scrap card and used it as a stencil over which I blended Weathered Wood Distress Ink.

I wanted to have a 'snowing' effect so I reached for my Tim Holtz Splatter Brush again and dipped it in water. I then splattered the water across my background and quickly mopped it off by rolling a kitchen roll across it. This gave me what looked like snow fall in the distance but I wanted to get a more 3 dimensional effect so I then mixed a little water with Titanium White acrylic paint at splattered again with my trusty splatter brush.

I then put the background to one side and started work on the sentiment plaque for the front of the box. I used an mdf 'Believe' and painted it with IndigoBlu English Cottage Paints Acrylic in Park Lane. I then splattered it with more IndigoBlu paints in Vodka Martini and Kingfisher Blue, along with some Titanium White.

To add sparkle I dotted soft body gel in places and sprinkled with glitter from the gorgeous Caribbean Seas set by Finnabair's Art Extravagance.

I next took a scrap of linen and painted it roughly with Titanium White acrylic to stiffen it up. I curled some silver metallic thread into loops and glued it to the linen, Finally I glued the 'Believe' onto the linen.

I went back to my background and folded the extra card at the base to make a shelf. I covered the 'shelf' with Finnabair's Snowpaste and dried it with my heat gun. I also painted some snow paste along the bottom of my acetate section of the box lid to give a snow drift effect.
Then I cut down two model snow coated fir trees, poked them through the the shelf and glued them in place. I fixed my Tim Holtz Mini-lantern to the top of the inside of the box and hid the wire behind my background. The battery holder fit under the shelf.

Finally I popped on the box lid and voila - from empty chocolate box to Christmas ornament.

Supplies used are available to order from Craftsite.co.uk. Just click the item to go to the website.

Art Basics Heavy Body Gel

Art Basics Soft Matte Gel

IndigoBlu Acrylic Paint

Tim Holtz Distress Inks

Finnabair Glitter

Tim Holtz Splatter Brush

Monday 5 December 2016

It's beginning to look a lot like Christmas…

Welcome to December!
I'm hopelessly behind with my holiday preperations but I have found time to make these cute little mixed-media wreath ornaments.

I started off by cutting a circle from strong black card stock and sticking a ring of buttons around the edge using my hot glue gun (I made sure that about 1/3 of each button overlapped the edge of the card circle). I left a gap at the top of the circle so that I could add my hanger & ribbon later.

I then added a layer of smaller buttons onto of the first layer as shown below. Try to choose a few buttons with text or detail on them as this will add texture later.

Next, I added a couple of embellishments from my Finnabair Mechanicals stash to the centre of the wreath using Art Basics Heavy Body Gel.

I then added a couple of beads I had lying around and filled in some of the gaps around the embellishments with Finnabair's Art basics Art Stones and mini-art stones. This also gives you some great textures.

Once the gel was dry (you can speed this up with a heat tool) I painted everything with a coat of Pebeo Black Gesso and dried it off.

Now everything was black, the magic could begin! I dry brushed my wreath with Finnabair's Art Basics Opal Magic. I used two different colours to get the effect I wanted, dry brushing one onto of the another. The magic of these paints is that they change colour depending on the colour you paint them over so you end up with a subtle range of tones.

You can add more colour to certain areas to give the wreath a 'worn' effect and make elements stand out.

I wanted the ribbon to have a vintage feel to it so I simply dry brushed double sided black satin ribbon with my opal-magic paint. As well as giving the vintage look to the ribbon, this has the added bonus of helping stiffen the ribbon slightly so it keeps it's shape better.

I glued a key ring chain in the centre of the 'gap' on my wreath to hang it, then made a bow from my satin ribbon and attached that with hot glue.

I hope you enjoyed this project.

Don't forget to follow the blog and if I have inspired you to try a bit of mixed media you can find the supplies I used in our online shop (just click the links) or pop in and see us at Craftsite in Cramlington, Northumberland if you are passing!

I would love to see your mixed-media art. Please share it on Instagram and tag me @craftsiteshop.

Supplies used are available to order from Craftsite.co.uk. Just click the item to go to the website.

Art Basics Heavy Body Gel